Item added to your cart Cart Checkout



Product Code: NV-202P

Manufacturer: NETSYS

Category: Uncategorized

Get it now


Our Price: NZ$296.01 inc GST

Stock at this price: Out of stock!
No ETA available

Ships from: Albany, Auckland

Log in to use Stock Alerts
Price & stock last updated: 2022-01-21 08:20:02

If you want to collect your product, to see all stock and locations or set Stock Alerts check out, click here

We have 1 supplier for this product

For pickups, choose the closest location to you. Otherwise, choose the cheapest or one that is in stock

Supplier 1

Product Name: NV-202P

Price 1: NZ$296.01 inc GST

Stock: Out of stock!
No ETA available

Available at: Albany, Auckland

Log in to use Stock Alerts
Price & stock last updated: 2022-01-21 08:20:02
2019-06-11 NZ$286.59
2020-01-16 NZ$296.01
2020-01-28 NZ$286.59
2020-01-29 NZ$282.56
2020-01-31 NZ$281.21
2020-04-21 NZ$296.01
2021-06-09 NZ$309.47
2021-06-18 NZ$296.01
Doolz ID: 104

Every effort is made to ensure the image(s) and/or product details are correct, but we cannot guarantee that they are. You should always check with us FIRST if you have specific requirements.


Ethernet over VDSL2 Extender, with PoE


The NV-202P is our low-cost LAN extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric using only a single copper wire pair. Designed specifically for a LAN to LAN extension and supporting both symmetrical and asymmetrical transmission at up to 100/100Mbps within 300m and 5/1Mbps at 3000m, this is a perfect solution to extend LAN with PoE for IP Surveillance or PoE powered devices at any location outside of the 100m reach.



  • Provides 2x 10/100 Mbps RJ45 Ethernet ports with a power injector
  • Supports RJ11/Terminal Block combo for Line port.
  • Supports high bandwidth up to 100Mbps symmetric over Line Ports
  • Support long reach mode up to 3km with 24 gauge phone wire
  • DIP switch with CO and CPE mode selectable
  • Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
  • Supports long packet size up to 1536 bytes
  • Supports Surge protection for line port
  • Auto-detect of PoE IEEE 802.3af/at (up to 30W) equipment providing protection from incorrect installation
  • Supports mid-span PoE mode
  • Supports wall mounting and DIN-Rail mount installation (Optional)
Standard Conference 
Standard IEEE802.3 10 Base-TX standard
IEEE802.3u 100 Base-TX standard
IEEE 802.3af / IEEE 802.3at standard
ITU-T G993.2 VDSL2 standard
Regulatory Compliance
FCC Class B
RoHS compliance
Hardware Specifications
Physical Interface:
2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x DIP Switch
1 x Power Jack
MTU: 1536 bytes
LED indication: 1 x Power LED
2 x Link/Active Status for Ethernet port
2 x PoE Indicator LED
1 x Link LED for VDSL2 port
1 x CO Mode indicator LED
1 x CPE Mode indicator LED
Power Requirement: Input Voltage: 36 ~ 57 V DC (Typical: 48V) (Commercial-grade desktop  Power Adapter)
Output: 30W max for each. (Pin Assignment:4/5(+),7/8(-))
VDSL2 Line Code: Discrete multitone (DMT) modulation
VDSL2 Transmission Mode: Packet Transfer Mode (PTM)
Operating Temperature: 0°C~ 50°C (32°F ~ 122°F) Fanless, free air cooling
Storage Temperature: -20°C ~ 70°C (-4°F ~ 158°F)
Humidity: 10 to 90% (non-condensing)
Weight: About 0.42 kg
Dimensions: 137 x 100 x 27mm (5.39" x 3.94" x 1.06")

Recent Products

Loading recent products

Lifetime Hits: 133 Doolz ID: 104 Price is subject to change without notice. Price and Stock last updated 21 January 2022



© 2022 Doolz Ltd - - (09) 238 1095

© 2022 Doolz Ltd - - (09) 238 1095